Pigman Put the Annihilator on his Truck
Oct 30th 2026
If you have hunted hogs in the last fifteen years, you know Pigman. Brian Quaca hosts and produces Pigman: The Series on Sportsman Channel, and before the cameras he spent two decades building custom rifles in Texas. He has killed more pigs from more truck doors than most people have seen, and he has handled every shooting rest that has come through the industry in that time.
So when a video came across our feed of Pigman standing at his truck with an Annihilator stuck to the door, leaning on it, working the arm, and talking it through, we paid attention. This is what he found.
The test: lean on it
The first thing Pigman did was the thing every truck hunter does to a rest they do not trust yet. He put his weight on it. Two 6″ suction cups on the door, the arm fully extended, and a grown man leaning into it. It did not move.
Then he worked it through its range, swinging the arm the way you would track a sounder breaking across a sendero, and let it go. It stayed where he left it. That is the whole job of a truck rest: carry the rifle, follow the shooter, hold the angle. The Annihilator did all three with nothing drilled, bolted, or clamped to the truck.
Why the truck is a shooting platform
Pigman says it plainly in the video: a lot of people are not into shooting from the truck, and he could not care less. On Texas hog country, the truck is how you cover ground, and the pigs do not wait for you to get out and set up sticks. The shot is often from the driver’s seat, out the window, at a moving target, in the dark.
Resting a rifle on a window frame or a rolled-up jacket works until it does not. The door is thin, the angle is wrong, and a thermal or night-vision rig puts enough weight forward that your arms give out before the pigs do. A rest that holds the full weight of the gun, and still lets you swing, turns the door into something closer to a bench.
Two heavy-duty 6″ suction cups lock onto the door, bed rail, or roof of a truck, SUV, or side-by-side in seconds. The XtraArm articulating arm holds any rifle and swings to the shot. Choose an Arca-Swiss / Picatinny clamp or U-Grip saddle clamp ballhead.
What makes it hold
The Annihilator is the same XtraArm joint that lives on our hang-on and side-by-side rests, put on a base built for sheet metal and glass. The two suction cups are the heavy-duty kind used to carry panes of glass, and together they hold far more than a rifle and a shooter’s weight. Because the arm articulates at the joint instead of the base, the cups never see a prying load; they only see straight pull, which is what suction is good at.
Like everything we make, it is machined in Cleveland, Ohio, by a family-owned shop, and it carries a lifetime warranty. If Pigman can lean on it, you can too.


